CCC Casting Machine Mechanical Arm Aluminum Rotor Die Casting
Comparing with the conventional die casting machine, Our automatic
rotor die casting machine has following features.
a. labor cost saving, only one operator required, the alumium scrap
b. safe, it is very easy for operator to run the rotor alumium
die-casting machine, operator only need to press "start" button, no
need to handling the heavy tooling which might occur body injury,
and the armature die casting machine has aluminium anti spatter
design to prevent the aluminium liquid from spraying and cause
c. Healthy, our aluminium die casting machine doesn't need
asbestine cup to keep the temperature and demould
d. Power saving, and tooling cost is much less and fast tooling
The aluminum die casting Machine main function and characteristic
Automatic get aluminium melt liquid, automatic loading and
unloading the rotor.
Rotor loading: automatic pneumatic circularly pick up.
Get aluminium melting liquid: servo motor control the mechanical
arm, control the liquid volume through human-machine interface.
Automatic cut the waste material, automatic recycle the cut wasted
material and convey it to the furnace by the conveyor.
Automatic feed mold releasing agent, the feeding time and times can
There is water cooling channel, helpful for reducing the mold
Setting on touch screen: forward and backward speed, stroke, swing
angle of the mechanical arm, loading speed,etc.
the armature aluminum die casting production Machine will alarm and
stop working if out of material.
Failure will be automatic displayed and machine will alarm.
One person can take care of more than one machine.
|1||main cylinder mold lock force||KN||400|
|2||main cylinder mold lock travel||mm||300|
|1||Injecting cyliner travel||mm||150|
|2||Injecting cylinder injecting force||KN||300|
|5||aluminum depot OD(Max)||mm||80|
|6||punching head OD(Max)||mm||80|
|7||aluminum depot capacity(Max)||kg||1|
|8||Injection punching head travel distance||mm||55|
|10||Rotor OD||mm||Max 80|
|11||Rotor stack height||mm||Max 90|
|3,Motor and pump:|
|1||Pump motor power||KW||7.5|
|2||Divider motor powder||KW||0.2|
|3||Oil pump (plunger pump)||L||40Y|
|2||assembly of oil tank and electric appliance(L*W*G)||mm||1500*1000*900|
|5,Cooling pump specification:|
|1||Submersible pump power||KW||1.1|
|2||Submersible pump rate of flow||M3/H||3.5|
|3||Submersible pump water pressure||MPa||0.4|
|Remark: the max pressure of this machine is 25Mpa / Submersible
pump power 220/380V Optional|
Rotor made by this machine
Click below picutre to view the vidio.