Fully Automatic Mixer Motor Armature Manufacturing Machine Rotor
1. This armature assembly line is of high automation.
2. The working effiecency is high, and it saves labor cost.
3. The machines detect the unquanlifed rotor automaticlly.
4. It decreases the larbor cost.
This rotor manufacturing assembly line including: shaft pressing
machine, end cover pressing machine, commutator pressing machine,
armature insulation paper inserting machine, armature winding
machine, commutator hot stacking machine, armature wedge inserting
machine and armature testing machine, ball bearing inserting
machine, and worm shaft inserting, All the process will be done by
machine. Operator only needs to do loading and unloading.
armature production machine.pdf
Shaft press---end cover press---commutator press----armature
insulation paper inserting---armature winding—commutator
welding----wedge inserting— armature testing---ball bearing
Click below picutre to view the vidio.
Shaft pressing machine
Shaft Pressing machine is used to insert shaft into lamination.
User only need to load lamination and shaft. Then machine will do
End cover machine
After shaft inserted, assembly line will transfer the rotor to next
station. And it will do end cover inserting.
It adopts vibration boult feeding method.
Commutator Pressing machine
This machine is used for pressing commutator onto the shaft.
Machine can automatic feeding commutator and armature core. This
machine can also be connected to a production line to achieve mass
Insluation paper inserting machine
This machine is used to inserting paper into rotor slot. The
insulation material can be as per customer's requirement, DMD, DM, polyester film are all can be used in this machine.
Rotor winding machine
After doing paper inserting machine, mechanical arm and converyor
will carry the rotor the rotor winding machine position. The
machine is equipped with touch screen and PLC, winding parameter could be set
and modified on the screen.
Commutator welding machine
It can weld both riser and hook type commutators. There are four
power control method, namely secondary constant current, secondary
constant voltage secondary constant frequency. This machine is
applied to DC motor and universal motor. It is controlled by PCL,
all the data setting can be done on the touch sreeen.
Wedge inserting machine
The wedge material can be as per customer's requirement, DMD, DM, polyester film are all can be used in this machine.
Commutator turning machine
After wedge inserting, converyor will tranfer rotor to the turning
position. There will be two turning working station. t greatly
improves the working effiency. After turing, there is a
bur-removing machine to clean the commutator.
Rotor testing machine
It is suitable for testing less than 72 segments Testing items
could be screened.Testing data saved automatically, and could be
traced and printed at any time.
Ball bearing inserting machine
This machine can automatically insert ball bearing into the rotor.
The inserting position is as per customer's requirement. Mechanical
arm will automatically pick up ball bearing. The conveyor will
transfer the rotor to the standby position.
Worm shaft inserting machine
This machine can automatically insert worm shaft into the rotor.
Mechanical arm will automatically pick up worm shaft. The conveyor
will transfer the rotor to the standby position.