AC Servo Motor Coil Insertion Machine / Semi-auto Stator Winding
1. Model No.: QLB1-200/250
2. This automatic stator coil winding inserting machine is designed
with a vertical frame.
3. The automatic stator coil inserter is controlled by PLC.
4. easy operation and convenient tooling change.
This automatic stator winding inserting machine is specially
designed for the motor manufacturers who have different sizes motor
and need to change the tooling frequently. The tooling change-over
time is 20~30 minutes. It only takes 1/4 time comparing the
conventional machine. The wedge is prepared by a wedge inserting
machine, and operator transfers it to the coil inserting machine,
then the maThe tooling change-over time is 20~30 minutes. It only
takes 1/4 time comparing the conventional machine. chine insert
coil and wedge simultaneously into the stator. The coil inserting
machine could set and save different data for different stators. It
could use different motor production and specially good for the
single phase and three phase induction motor manufacturers.
Stator stack length
Slot number range
|Tooling traveling distance||Max.110mm|
|Max. Slot filling rate||80%|
Machine main function and characteristic
The stator coil inserting machine insert coil and wedge
simultaneously, coil insertion is controlled by servo motor system.
It is controlled by HMI, and machine can diagnose breakdown
Both copper wire and aluminium wire are applicable.
Production capacity ≤20s/set (exclude the man-hours for auxiliary
Primary qualification rate for copper wire ≥98%, after rework, the
Wire pushing height and stop time can be set in the HIM interface.
The machine has fixed foot and removable wheel.
Wedge should not be damaged, no burr in the surface, no movement or
Wedge should not be damaged, no movement or slide. Copper wire
should not be pull away from the paper.
The stator should not be deformation or stator lamination should
not be upward.
Easy operation and convenient tooling change. The tooling change-over time is 20~30 minutes. It only takes 1/4
time comparing the conventional machine. We could customize machine
for our customer as per their requirement.We directly supply our
machines to many countries, like USA, France, Turkey, Iran, India,
Brazil, Argentina, Mexico etc.
The touch screen of this coil insertiong machine