Automatic Stator Winding Coil & Wedge Inserting Machine With
1.Automatically insert the winding into stator slot.
2.This machine is used for induction motor stator.
3.The winding/coil and wedge/top cover is inserted simultaneously.
4. Simple operation, low noise, fast speed and high automaticity.
5. PLC and touch screen control.
This machine is suitable for inserting coil and wedge into stator
by servo system; This type of Stator Winding Inserting Machine can
insert coil and wedge or coil and wedge in the mid of slot into
stator at a time; wedge feeding is to be done bt stepping motor,and
coil and wedge inserting is by servo system; different parameter
could be set in human-machine interface; the speed and feeding mode
is acquirable according to different slot filling rate and
different kind of wire; different size stator production can be
achieved by changing tooling;especially apply to micro induction
motors such as air conditioner motor, washing machine motor,
compression motor, fan motor, generator and pump motor.
This machine can insert the winding/coil and the wedge/top cover
into the stator slot simultaneously. This machine is used for
induction motor stator which meet the specification in the below
table. It is suitable for micro induction motors such as air
conditioner motor, washing machine motor, compression motor, fan
motor, generator and pump motor.
Machine video link
Max stator O.D
Max stator stack length
Slot number range
Max winding feeding rate
Copper wire/Aluminum wire
400pcs/ 8 hours
1800mm × 650mm × 1700 mm
- Power on the machine
- Insert the wire by winding form
- Adjust the tooling according to different model stator
- Put stator to the tooling
- Set the stator diameter in the touch screen then select the pre-set
- Press "start" button.
- Machine will automatically do coil inserting.
- Take out the stator
This picture shows the inserting process.