Welding The Copper Wire Commutator Hook Fusing Machinery /
Machinery For Mixer Motor
1, This commutator welding machine uses Miyachi controller.
2, This commutator welding machine can detect the welding current, alarm if the welding
current is out of the set limit.
3, This commutator welding machine is used for welding the wire with the commutator hook.
4, The touch screen can save different program for different model
5, PLC and touch screen control.
Automatic Commutator Hotstacking Machine
This automatic commutator hotstacking machine is used for welding
the copper wire the commutator hook, adapts Miyachi controller to
detect the welding current, it will alarm if the welding current is
out of the set limit. The performance is stable and reliable. The
machine is easy operation and easy change-over.
This rotor commutator spot welding machine is suitable for
commutator fusing, it’s widely used in the motor field, such as
wiper motor, vacuum cleaner motor, mixer motor, window lifter
motor, condenser motor, power tool motor, DC motor, etc.
This commutator fushing spot welding machine is easy for operation.
It’s helpful for customer to reduce labor cost and improve
production efficiency. It can detect the hook fusing missing.
1. The equipment should be placed in a dry place and prevent from
dusts. There should not be any corrosive gas and
flammable/explosive objects in the surrounding area.
2. Make the surrounding area level; adjust bolts of each position.
3. Correctly connect with the inlet power line; the wire diameter
should be bigger than 4m㎡, and should use copper wire.
4. Correctly connect with the air pipe.
5. Completely check whether any part of the machine is loosen
during the transportation. Correctly adjust the fastening points of
6. Add water into the cooling water tank; the water should be
around 90% of the capacity of the water tank.