2 Pole 3 Phase Stator Winding Machines With Double Working Stations
- Winding automatically done by machine
- 2 working stations, 2 flyers.
- PLC and touch screen control.
- Manually fitting mould, and straining and releasing the mould with
hand control lever.
- Quickly replace the tooling gripper;
- Travel, tilt angle can be adjusted;
- The stator coil winding machine is easy to set parameters, alarm
Automatic Stator Winding Machine Double Working Stations Double
ND-TS-1A stator winding machine is suitable for two-poles stator
winding, such as mixer motor, grinder motor, vacuum cleaner motor
etc. It can wind two stators at same time. It's self-locked, quick
and convenient. Winding parameter can be set and saved through the
This type of stator winding machine is suitable for two-poles
stator winding, such as mixer motor, grinder motor, vacuum cleaner
Stator O.D range
Air supply pressure
Three phase AC380V50/60Hz
Operation procedure of this machine
Fix the winding tools on stator core, then put stator core on the
loading base, press START button, safety door will close, loading
base will move inside to the winding position, machine will
automatic winding and cut wire, at this time, operator could fix
the winding tools on another two stator cores; after finishing
winding, loading base will move outside, safety door opened, then
take out the completed stator, and put another two stator cores on
the loading base, one cycle is completed.
Easy operation, high automation. PLC and touch screen control,
double working stations.
Stator winding station